Trailer Parts and Accessories

Explore our extensive range of trailer parts and accessories from AL-KO. Whether you're repairing, upgrading, or customizing your trailer, our selection has everything you need for smooth, safe and reliable trailer operation. From brackets to bearing kits, trailer winches and everything in between, explore the range below and upgrade your trailer with the finest selection of accessories from one of the industry's leading names.

Showing 1–16 of 59 results

AL-KO - Mechanical Caliper Brakes, Forward Pull - Pair - 323103

$174.80

Kit Includes:

2 x mechanical disk brake callipers

4 x Zinc Plated Blots 7/16 UNF x 2/14

4 x 7/16 washers - shake proof

4 x Flat zinc washers 7/16 x 7/8

Style:
Forward Pull

AL-KO - HT Holden, c/w Chinese S/L bearings & marine seal - 441291

$130.95

All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.

The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).

To ascertain what hub from the vast AL-KO range is required it is important to know the following:

Total load you expect a pair of hubs to carry in kg.

Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).

Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).

 

Includes:

1 x Galvanised Disc Hub fitted with 5x 7/16” UNF wheel studs.

5x 7/16” UNF wheel nuts

1 x Bearing Cone LM68149 - Chinese

1 x Bearing Cone LM12749 - Chinese

1 x Marine Seal - SL Type

1 x Grease cap

AL-KO - Hydraulic Brake Caliper Set - Dacromet - 341001

$331.85

AL-KO Dacromet coated hydraulic disc brake calipers are fitted with special pistons that will not rust.

The simplicity of hydraulic lines connecting multiple calipers makes this style of caliper suitable for installations where more than one axle is used.
Hydraulic disc brake calipers are typically actuated with over ride couplings or an electric over hydraulic actuation system such as AL-KO's IQ7. When Trailers with loaded weights exceeding 2000 kg require independent control and breakaway facility, causing the brakes to automatically be activated should the towing vehicle and the trailer become accidentally disconnected. AL-KO IQ7 fulfils this legal requirement.

AL-KO hydraulic disc brake calipers are suitable for disc hubs and rotors of thicknesses from 12mm to 15mm.

Recommended operating pressure is 6.9 mpa (1000psi). Mounting holes: 88.9mm centre to centre. (3.5")

Includes:

2 x Hydraulic Disc Brake Calipers Finished In Dacromet

2 x Brake Pads

AL-KO - LM Trailer Bearing Kit - Japanese - 482005

$37.85

Trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.

In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.

The bearing on the outside is called the outer bearing.

LM (Holden bearings) are rated for 750 kg on a 39 mm round or 40 mm square axle

LM Kit Includes:

1 x LM67010 Cup

1 x LM11910 Cup

1 x LM67048 Cone

1 x LM 11949 Cone

1 x Grease Cap

1 x Standard Seal

1 x Split Pin

AL-KO - Slimline Marine Bearing Kit - Japanese - 484051

$54.40

Marine trailer wheel bearings comprise of two parts, the cup which is pressed into the hub and the cone, this is the part that contains the rollers of the marine trailer wheel bearing. Trailer wheel bearings should always be replaced in a set, that is the cup and cone together.
In a bearing combination in a hub, the bearing on the inside of the hub flange (the side closest to the centre of the trailer)is called the inner bearing.

The bearing on the outside is called the outer bearing.
Marine bearing kits are provided with a marine seal designed to prevent water ingress and grease contamination.

SL (Slimline or Ford) bearings are rated for 1500 kg on a 45 mm round or square axle.

Slimline Marine Bearing Kit Includes:

1 x L68110 Cup

1 x LM12710 Cup

1 x L68149 Cone

1 x LM 12749 Cone

1 x Grease Cap

1 x Marine Seal

1 x Split Pin

AL-KO - Ford, c/w Chinese S/L bearings & marine seal - 441293

$131.35

All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.

The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).

To ascertain what hub from the vast AL-KO range is required it is important to know the following:

Total load you expect a pair of hubs to carry in kg.

Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).

Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).

 

Includes:

1 x Galvanised Disc Hub fitted with 5 x 1/2” wheel studs.

5 x 1/2” UNF wheel nuts

1 x Chinese Bearing Cone LM68149  

1 x Chinese Bearing Cone LM12749  

1 x Marine Seal - SL Type

1 x Grease cap

AL-KO - 6" Gal Hub - HQ Holden c/w Chin LM bearings & marine seal - 441279G

$73.55

Includes:

1 x Galvanised 6” Hub fitted with 5x Zinc plated 7/16” UNF wheel studs

5 x Zinc plated 7/16” UNF wheel nuts

1 x Bearing Cone LM67048 - Chinese

1 x Bearing Cone LM11949 - Chinese

1 x Marine Seal - LM Type

1 x Grease cap

AL-KO - 6" Gal Hub - HT Holden c/w Chin LM bearings & marine seal - 441281G

$73.55

Includes:

1 x Galvanised 6” Hub fitted with 5x Zinc plated 7/16” UNF wheel studs.

5 x Zinc plated 7/16” UNF wheel nuts

1 x Bearing Cone LM67048 - Chinese

1 x Bearing Cone LM11949 - Chinese

1 x Marine Seal - LM Type

1 x Grease cap

AL-KO - Hub Kit, Gal, Ford China S/Line Bearing, Marine Seal, No Nuts - 441159BX

$59.00

All of AL-KO's hubs are manufactured from high grade ductile iron to give maximum achievable strength.
Some of AL-KO's hubs are available in zinc plated or hot dipped galvanised finish as well as the traditional raw cast finish.

The capacity of a hub is dependent on the size of wheel bearings fitted and such dimensional limits such as flange diameter and the available hole in the wheel to which it is fitted (on the hub this is the hub outer boss dimension).

To ascertain what hub from the vast AL-KO range is required it is important to know the following:

Total load you expect a pair of hubs to carry in kg.

Wheel bearing type to be fitted (LM, slimline, 1.5 t, etc).

Wheel drilling pattern (4 stud Datsun, 5 stud Mini, 5 Stud HQ Holden, 5 stud Ford, 6 stud Landcruiser).

Includes:

1 x Galvanised hub fitted with 5 x zinc plated 1/2” wheel studs.

5 x zinc plated 1/2” UNF wheel nuts

1 x Bearing Cone LM68149 - Chinese

1 x Bearing Cone LM12749 - Chinese

1 x 2 Piece Marine Seal - SL Type

1 x Grease cap

AL-KO - Wheel Nut Set - 1/2" Zinc Plated - 490378

$33.85

AL-KO Wheel Nuts are available in various sizes. Always ensure that you use wheel studs and nuts that are correct for the wheel size selected.
Includes 5 x wheel Studs, 1/2" zinc plated.
Zinc plated for additional corrosion resistance.

JOIN OUR COMMUNITY

Get E-mail updates about our latest shop and special offers.