BMPRO J35 - BL Power Management System


Elevate your RV experience with the BMPRO J35B-L Power Management System. Exclusively crafted for Jayco vehicles, this intelligent battery management system is versatile enough to charge various battery types, including 12V sealed lead-acid (SLA) batteries, valve-regulated lead-acid batteries (VRLA), absorbed glass mat (AGM) and gel batteries. With capabilities to derive power from various sources and a multi-stage charging system, it promises longer battery life thanks to features such as low voltage disconnect and storage mode. Stay informed and in control by connecting to the JControl or JHub for a seamless power experience.

14 x 12VDC outputs
35A maximum output current
20A solar input current
Lithium (LiFePO4) compatible

This product is specifically designed for and exclusively supplied in a range of Jayco recreational vehicles.

Checkout with credit/debit card or PayPal
Availability : In Stock
Categories :


J35 Model B-L is an intelligent battery management system with a distribution system and a multi-stage battery charger. J35B-L model has been specially designed for Jayco and can be found on-board modern caravans and motorhomes.

Use J35B-L BMS for charging 12V Sealed Lead-Acid (SLA) batteries including valve-regulated lead-acid (VRLA) batteries, both absorbed glass mat (AGM) and gel batteries. This battery management system is also compatible with lithium batteries (LiFePO4). The power supply is able to deliver 35A maximum to the battery and loads.

Charge your battery to the optimal charge level from AC mains, your solar panels, or from auxiliary (DC or vehicle power). A maximum DC charging current is 15 Amp. Multi-stage battery charger including bulk, absorption, float, and periodic boost charging modes to ensure long battery life. The J35B-L System supports up to 300W of panels with open circuit voltage between 18 and 28 VDC.

J35B-L keeps your battery healthy for a long time thanks to the multiple battery protection features, such as low voltage disconnect and storage mode.

Built in electronic fuses protect the loads. You can also use up to 14 outputs to connect your appliances, including hot water, water pump, lights, and more.

Get more out of the J35B-L intelligent battery management system by connecting it to accessories, such as battery monitors JControl or JHub. They will allow you get access to the monitoring your power supply status in a handy location. Moreover, when used with the ControlNode103, J35B-L is SmartConnect ready and allows monitoring multiple Bluetooth sensors via JHub app.


Length: 282mm
Height: 203mm
Width: 65mm
Weight: 2kg


Input Voltage Range: 240 VAC nominal, ± 10%, 50-60 Hz
Input Surge: < 40 A (cold start)
Output Current: 35A Continuous (load + battery current)
Factory Set Voltage: 13.65 V ±2% (Float voltage)
Output Ripple Voltage: < 150 mV
Over Voltage Protection: < 18 V
Over Current Protection: 35A to 38A (load + battery current)
Battery Current Limit: 15A max
Battery Connect: 10.8 ± 0.2 V
Low Voltage Disconnect: 10.8 ± 0.2 V
Battery Drain after LVD: < 8mA
Efficiency: > 83 %
Cooling Fan: Thermally controlled
Solar Input Current: < 20A
Solar Input Voltage: 15V to 25 V
Ambient: 0°C - 50°C

Standards: Safety: IEC60335-2-29, IEC62109-1,UL458, CSA, C22.2 No.107-1, EMC: CISPR 14, IEC61000-3-2, IEC61000-3-3 Approvals: RCM, UL, cUL

Please login to leave your review

BMPRO J35 - BL Power Management System




Get E-mail updates about our latest shop and special offers.